三菱 M700VM70 三菱-M700VM70 系列 Programming 手冊 (Lathe System)
資料介紹：
In the case of a lathe, axis names (coordinate words) and directions are defined as follows.
The axis at right angles to the spindle
Axis name: X axis
The axis parallel to the spindle
Axis name: Z axis
Coordinate axes and polarities
Since coordinates based on the right hand rule are used with a lathe, in the above figure, the positive direction
of the Y axis which is at right angles to the X-Z plane is downward.
Note that a circular on the X-Z plane is expressed as clockwise or counterclockwise as seen from the forward
direction of the Y axis.
(Refer to the section on circular interpolation.)
(a) Spindle stock
(b) Tailstock
(c) Tool
(d) Turret
+X
+Y
+Z
(a)
(b)
(c)
(d)
上一條：
下一條：相關下載
Bulude 廣州凌控自動化科技有限公司 ◎版權所有
銷售熱線：020-28625769 傳真：020-28029239
