三菱 三菱-Loop Control 模塊 用戶手冊 (硬件) Q62HLC
資料介紹：
oming loose and dropping. Securely fix the module with screws if it is
subject to vibration during use.
z Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout, short circuits, or
malfunction. If the screws are tightened too much, it may cause damage to
the screw and/or the module, resulting in fallout, short circuits or
malfunction.
z Be sure to shut off all phases of the external power supply used by the
system before mounting or removing the module.
Not doing so may cause electric shock or damage to the module.
In the system where a CPU module supporting the online module change is
used and on the MELSECNET/H remote I/O stations, modules can be
replaced online (during energizing). However, there are some restrictions on
replaceable modules and the replacement procedures are predetermined
for each module.
For details, refer to the chapter of the online module change in Loop Control
Module User’s Manual.
z Do not directly touch the conductive area or electronic components of the
module. Doing so may cause malfunct
上一條：
下一條：相關下載
Bulude 廣州凌控自動化科技有限公司 ◎版權所有
銷售熱線：020-28625769 傳真：020-28029239
